20 inch PP melt blown filter element

20 inch PP meltblown filter is mainly used for water treatment industry to filter rust and impurities of the accessories, water treatment and purification of the main wire around the filter, folded filter, activated carbon filter and other types

Name: 20 inch PP meltblown filter element

Material: Polypropylene

Purpose: solid-liquid separation and filtration

Accuracy: 1-100 um

Replacement period: according to the actual use of the situation

Filter characteristics

1, PP meltblown filter core aperture is dense, uniform, high filtration efficiency.

2, because the particles will occur in the PP meltblown filter channel bridging phenomenon, so that the particles less than the channel can be blocked, the filtration efficiency is more than 99%.

3. PP melt-blown filter element has high cleanliness, no pollution to water quality, corrosion resistance to acid, alkali and other chemical reagents and organic solvents.

Cleaning method

1, the use of industrial detergent cleaning

There are many large industrial equipment. In order to ensure the cleanliness of the machine, some businesses have developed descaling agents suitable for industrial equipment. Compared with household detergents, they have better effect and higher decontamination rate, and are mostly used to clean deep pollutants.Wash in the same way as detergent.

2. Use detergent to clean

Now the kitchenware market has a lot of decontaminate detergent, can also be used in the PP melt-blown filter element cleaning.Add a basin of water, take a small amount of detergent into the basin, stir evenly by hand, and then put the blocked filter element into it, so that the color of the filter element becomes shallow or the color of the water is unchanged.

3. Rinse directly with clean water

First connect a basin of water, and then the need to clean the PP meltblown filter element from the filter bottle removed, the filter element into the basin, with a brush to the deep color of the place to wash, and then put in the basin swing rinse, after the basin turbidity for a new then.Wait until the surface color of the filter element becomes light or there are no pollutants in the discharge.

Matters needing attention

1, please choose the filter element according to the accuracy of the filtering liquid and the impurities contained in it. The viscous liquid can be filtered by two stages, and the former coarse filter can reduce the resistance and prolong the service life of the filter element (generally 3-4 times).

2. Please install the filter element correctly. If you find that the filter water pollution is found, you should carefully check whether the filter element is skewed, and whether the two ends are strictly aligned and compressed.

3. When the pressure difference reaches 0.2Mpa, the filter element should be cleaned or replaced.