Hydraulic oil filter element 0030R020BN4HC

Hydraulic oil filter element 0030R020BN4HC

It is an indispensable part of the transmission medium pipeline series. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium. It can protect the normal operation of the equipment. When the fluid enters the filter, the impurities are blocked, and the clean filtrate is discharged from the filter outlet. When cleaning is required, just take the filter element out of the filter, treat it with industrial liquid, and then install it.

Main performance:

1. High filtration accuracy, small pressure difference, large flow rate, large dirt holding capacity and long service life

2. The filter aperture is small inside and large outside. It has a good deep filter effect

3. The filter element is made of different materials to ensure various liquid filtration requirements and achieve the best filtration effect.

Main technical performance:

Filtration accuracy: 1μm, 5μm, 10μm, 20μm, 30μm, 50μm, 75μm, 100μm, etc.

Filter material: use high-quality glass fiber filter material

Filtration ratio: XR100

Structural strength: 1.0Mpa, 2.0Mpa, 16.0Mpa, 21.0Mpa

Scope of application: Used for hydraulic pressure and lubrication system oil filtration. It is used to filter out pollutants in the system to ensure the normal operation of the system.

Standard test:

Filter burst resistance verification according to ISO 2941

Element Structural Integrity per ISO 2943

Filter element compatibility verification according to ISO 2943

Filter filtration characteristics according to ISO 4572

Filter differential pressure characteristics according to ISO 3968

Flow-pressure differential characteristic test according to ISO 3968

Name

Email(Required)*

Phone

Company

Title

Message(Required)*

Verification code

Submit Message

Vertical combined separator with high efficiency coalescing filter element

LYPL,LYPD Series High Flow Low Pressure Pipeline Filter

Oil Mist Separator