PP Melt Blown Filter Cartridge

PP melt blown filter cartridge is a tubular filter element made of non-toxic and odorless polypropylene particles, which are heated and melted, sprayed, drawn, and formed. If the raw material is mainly polypropylene. It can be called PP melt blown filter element. It is not only widely used in water purification, but also has outstanding chemical compatibility, suitable for filtration of strong acids, strong alkalis and organic solvents. Strong dirt holding capacity, long service life and low cost.

Features

(1) Filtration efficiency and filtration precision, the pore density of the filter element is uniform, and the filtration efficiency is over 99%.

(2) The filtration resistance is small, the filtration flow rate is large, the dirt holding capacity is large, and the service life is long. The fiber diameter and clearance of this product can be adjusted during the production process. The microporous inner layer of the filter element is small and the outer layer is larger, which increases the flow rate and dirt holding capacity. The filter element is not easy to block and prolongs the service life.

(3) It has high cleanliness, no pollution to water quality, acid, alkali and organic solvents, and corrosion.

(4) High strength. The filter element will not be deformed when the water pressure difference between the inlet and outlet of the filter exceeds 0.4Mpa. When the temperature exceeds 90°C, the filtration efficiency will not decrease.

(5) After the treatment and modification of polypropylene, this product has extremely high hydrophilicity and can absorb ten times the weight of water, so it can be used for oil-water separation.

Name

Email(Required)*

Phone

Company

Title

Message(Required)*

Verification code

Submit Message

Vertical combined separator with high efficiency coalescing filter element

LYPL,LYPD Series High Flow Low Pressure Pipeline Filter

Oil Mist Separator