The filter element has large filtration area, long service life, high strength, stable operation and low leakage.
The high-flow filter element is made of a pleated process with a 6-inch high barrel diameter. The interior is a high-strength polypropylene support skeleton that flows from the outside to the inside. The outer bracket can be made of polypropylene skeleton or polyester material welded mesh, and the structure makes the filtering area larger than that of ordinary folded filter elements. The initial pressure difference is low and the flow rate is large, which is very suitable for pre-protection filtration in high-purity water systems.
The filter element is made of hydrophilic membrane material, which can be used directly without soaking before use, and the operation is simple and the maintenance time is reduced.
The filter element has large filtration area, long service life, high strength, stable operation and low leakage.
The larger the filter element, the design is suitable for large flow, large application site pollution, simple system, no acid and alkali consumption and pollution of acid and alkali waste liquid on mechanical strength.
It will not deform even in harsh service conditions and can be installed in existing enclosures without replacement or modification.
Filter material: polypropylene membrane
Skeleton Material: Polypropylene
End Cap Part Material: Polypropylene
Accuracy: 1μm, 5um, 10 um, 20 um, 50 um, etc.
Application
Turbine condensate treatment;
Pharmaceutical company water filtration
Bio-enterprise water filtration;
Anti-system pre-filter
Seawater desalination system pre-filter
Petrochemical industry sewage filtration
Specification
The length of the filter element is 10 inches, 20 inches, 30 inches, 40 inches, 60 inches, etc., support customization
O-ring material: silicone rubber, EPDM rubber, fluororubber
Operating temperature: 80°C,
Filter element withstand pressure drop: 4.2Bar
Filter failure pressure drop: 2.4Bar