Six ear chuck dust filter cartridge

Six-ear chuck dust removal filter cartridge non-woven cloth filter cartridge Dust filtering shot blasting machine six-ear quick removal dust removal filter element

Working principle

Air filter cylinder is the core of air filter. In industry, unfiltered natural air enters the air compressor and air

Air supply system, blast furnace induced draft fan, gas turbine, diesel engine, oxygen raw material air compressor, because of the air

A large amount of dust, dust is the natural enemy in the long time of high-speed airflow operation, dust caused by the above equipment blade, impeller

Such as internal components wear, corrosion and scaling, shorten the service life of the equipment, affect the production and cause economic losses, so

Self-cleaning air filter is the necessary supporting equipment above.

The important position of welding flue gas dust removal filter element in the filter self-cleaning filter consists of the first filter tube, Vente tube, since

Clean nozzle, reverse blowing system, control system, clean air chamber and air outlet, frame and so on.

Filtration process: Under the suction negative pressure of the compressor, KJL self-cleaning air filter inhales ambient air

When the air passes through the self-cleaning air filter cylinder, the dust is blocked on the outer surface of the filter cylinder due to gravity, static electricity and contact

The purified air enters the clean air chamber and is sent out by the exhaust duct.

Self-cleaning process: when the computer gives the command, the solenoid valve starts and drives the diaphragm valve, instantly releasing a pressure for

0.4-0.6mpa pulse air flow, through the nozzle rectification ejected, Vente tube suction, sealing, expansion from the welding flue gas dust

The dust accumulated on the outer surface of the filter cartridge is blown out evenly inside the filter cartridge, and the self-cleaning process is completed.

The core of the air filter is the filter cylinder, using imported filter paper, through the process of production. . Filter cylinder filtration

High efficiency (colorimetric method 90%, weight method 99.9%) accuracy (1UM)99.9%, 5%-10% higher than the general.

Technical parameters

1, filter tube specifications :DH32100(320X220 XH1000)

2, single filter cylinder air volume :20~30M3/MIN

3. The filtration area of a single filter cylinder is 15~25M2

4, operating temperature :-45*°C~80°C

5, filtration efficiency :99.99%

Self-cleaning air filter dust filter element, dust filter cylinder are provided with metal protection net, end cover, internal and external skeleton

Galvanized parts, no rust. Filter cylinder filter material imported filter material, material for synthetic fiber, according to different specifications of the filter

The expanded area also varies from 15 to 25M2. Filtration efficiency is 99.99%. Low running resistance, long service life, more energy

Undergoes pulse blowback of airflow. The filter cartridge uses elastic neoprene rubber with close closed holes. The filter cartridge adopts pulse, vibration or reverse air

Flow dust cleaning, can easily make the filter cartridge in life, dust cleaning effect is good. At the same time, the service life of the filter cartridge is increased.

Products characteristics

1, dust filter cylinder adopts imported polyester fiber as filter material, the layer of sub-micron fiber adhesion on the general filter material,

In addition, the arrangement of fibers on the adhesive layer is very close, and the smallest sieve can block most of the sub-micron dust particles

On the filter material surface;

2, the use of filter material folding, can increase the filter area, and make the dust collector structure more compact;

3, the filter cylinder height is small, installation and maintenance work is small;

4. Compared with the same volume dust collector, the filtration area is relatively large, the filtration wind speed is small and the resistance is not big;

5. Dust remover adopts pulse jet online dust remover. The dust cleaning process is automatically controlled by pulse controller

According to the needs of time control method for dust removal. A plurality of filter cartridges are arranged in the dust collector to increase the filtration area

When the welding flue gas dust removal filter cartridge meets the setting requirements of dust removal, the spraying device shall be started for dust removal and other filtration

The cylinder works normally, so that the dust cleaning effect is achieved and the operation of equipment is not affected, so that the dust collector can run continuously.

Application

1, in the machine tool industry, 85% of the machine tool transmission system has adopted hydraulic transmission and control. Such as grinding machine, milling machine

, planer, broaching machine, press, shearing machine, and combination machine tools, etc.

2, in the metallurgical industry, electric furnace control system, rolling mill control system, open furnace charging, converter control, blast furnace

Hydraulic technology is used for control, strip deviation and constant tension devices.

3, in the construction machinery, the widespread use of hydraulic transmission, such as excavators, tire loaders, truck cranes, shoes

With bulldozer, tire crane, self-propelled scraper, grader and vibratory roller, etc.

4, in agricultural machinery, the use of hydraulic technology is also very widespread, such as combine harvesters, tractors and ploughs.

5, in the automotive industry, hydraulic off-road vehicles, hydraulic dump vehicles, hydraulic aerial vehicles and fire trucks are adopted

Hydraulic technology was used.

6, in the textile industry, the use of hydraulic technology of plastic injection molding machine, rubber vulcanization machine, paper machine, printing machine and

Textile machines, etc.